Before you start
- SFOS 19.0 or later, administrator account
- Separate zone (e.g. GUEST) and interface for the guest network
1. RADIUS server
-
Authentication›Servers›Add
- Server type: RADIUS server
- Server name: HotSpot
- Server IP: <HotSpot RADIUS IP>
- Authentication port: 1812
- Shared secret: <Shared secret>
- Enable accounting: On · Accounting port: 1813
- Test connection
-
Authentication›Services›Firewall authentication methods
- Authentication server list: add HotSpot and move it to the top
- Default group: Guest
2. Guest rule
-
Rules and policies›Firewall rules›Add firewall rule›New firewall rule
- Rule name: Guest-Internet
- Source zones: GUEST
- Destination zones: WAN
- Match known users: On · Users or groups: Guest
- Use web authentication for unknown users: On
- Log firewall traffic: On
-
Rules and policies›Firewall rules›Add firewall rule (above it)
- Rule name: Guest-WalledGarden
- Destination: HotSpot walled garden FQDN hosts
- Match known users: Off
3. Captive portal behavior
-
Authentication›Web authentication
- Authorize unauthenticated users for firewall rules: On
- Captive portal behavior: Open in new browser tab
Redirecting the portal to the HotSpot welcome page is configured together with our installation team, depending on your firmware.
4. Syslog
-
System services›Log settings›Add (Syslog server)
- Name: LogIQ
- IP address/domain: <LogIQ collector IP>
- Port: 514 · Facility: DAEMON · Format: Standard
- Tick Firewall, Authentication and Events logs
Verification
- The guest should appear under Current activities > Live users.
- Sophos records should appear in LogIQ > Live Stream.
Menu names may differ slightly between firmware versions. If you get stuck, our installation team supports you remotely.