Request a quote WhatsApp

Maipu

Maipu MyPower / NSR series

Set up HotSpot guest access on Maipu routers and switches with portal authentication and RADIUS; syslog records flow to LogIQ.

Before you start

  • CLI access to the Maipu device (console or SSH)
  • Guest VLAN and DHCP pool defined
  • Device access to HotSpot servers on 1812/1813 UDP

1. RADIUS server

  1. CLI (global config)

    • radius-server host <HotSpot RADIUS IP> auth-port 1812 acct-port 1813
    • radius-server key <Shared secret>

    Command syntax may differ slightly by product family.

2. Portal authentication

  1. CLI (portal config)

    • portal server HotSpot
    • portal url <HotSpot portal URL>
    • Allow DNS and HotSpot domains with portal free-rule

    The portal page will not load without the walled garden entries.

3. Apply to the guest VLAN

  1. CLI (interface)

    • Enable portal on the guest VLAN interface
    • AAA authentication: radius HotSpot
    • Accounting interim interval: 600 s

4. Syslog

  1. CLI (logging)

    • logging host <LogIQ collector IP>
    • logging source-interface <management interface>
    • logging level informational

Verification

  • The user should appear online on the device after portal login.
  • Records from the Maipu source should arrive in the LogIQ live stream.

Menu names may differ slightly between firmware versions. If you get stuck, our installation team supports you remotely.

Let’s simplify your guest Wi-Fi journey

Keep your existing infrastructure and bring access, engagement and 5651 records into one panel.

Request installation support

We use cookies for visit statistics. Cookie policy