Before you start
- WLCs discovered in the Catalyst Center inventory
- Defined site hierarchy
- NETWORK-ADMIN role
1. Register the RADIUS server
-
System›Settings›External Services›Authentication and Policy Servers›+ Add
- Server IP Address: <HotSpot RADIUS IP>
- Shared Secret: <Shared secret>
- Server Type: AAA
- Protocol: RADIUS
- Authentication Port: 1812 / Accounting Port: 1813
-
Design›Network Settings›Network›(Global or site)›AAA Server
- Client/Endpoint: RADIUS
- Server: <HotSpot RADIUS IP>
2. Syslog target
-
Design›Network Settings›Network›Syslog Servers
- IP: <LogIQ collector IP>
3. Create the guest SSID
-
Design›Network Settings›Wireless›SSIDs›+ Add›Guest Wireless
- Wireless Network Name (SSID): Guest
- Level of Security: Web Policy
- Authentication Server: External Web Authentication
- Web Auth URL: <HotSpot portal URL>
- Pre-Auth ACL: DNS, DHCP and walled garden addresses
- AAA Configure: select the HotSpot server
- Where will your guests redirect after successful authentication: Original URL
-
Next›Wireless Profile
- Assign the SSID to the relevant sites
4. Provision to the WLC
-
Provision›Network Devices›Inventory›(select WLC)›Actions›Provision›Provision Device
- Confirm Assign Site and Managed AP Locations
- Deploy > Now
Verification
- Provision status should be “Success”.
- On the WLC, confirm the WLAN was created with Web Policy and the external URL.
Menu names may differ slightly between firmware versions. If you get stuck, our installation team supports you remotely.