Before you start
- IOS-XE 17.x for 9800, 8.5 or later for AireOS
- Guest VLAN and DHCP
- WLC reachability to HotSpot on UDP 1812/1813 and TCP 443
Catalyst 9800 — 1. RADIUS server and group
-
Configuration›Security›AAA›Servers / Groups›RADIUS›Servers›+ Add
- Name: HotSpot
- Server Address: <HotSpot RADIUS IP>
- Key: <Shared secret>
- Auth Port: 1812 / Acct Port: 1813
-
Configuration›Security›AAA›Servers / Groups›RADIUS›Server Groups›+ Add
- Name: MS-Group
- Assigned Servers: HotSpot
-
Configuration›Security›AAA›AAA Method List›Authentication›+ Add
- Method List Name: MS-Auth
- Type: login
- Group Type: group
- Assigned Server Groups: MS-Group
-
Configuration›Security›AAA›AAA Method List›Accounting›+ Add
- Method List Name: MS-Acct
- Type: identity
- Assigned Server Groups: MS-Group
Catalyst 9800 — 2. Pre-auth ACL and Web Auth parameter map
-
Configuration›Security›ACL›+ Add
- ACL Name: MS-PREAUTH
- ACL Type: IPv4 Extended
- Rules: permit DNS, DHCP and HotSpot walled garden addresses
-
Configuration›Security›Web Auth›+ Add
- Parameter-map Name: MS-WEBAUTH
- Type: webauth
- Redirect URL for login: <HotSpot portal URL>
- Redirect On-Success: original
- Portal IPV4 Address: HotSpot portal IP
Catalyst 9800 — 3. WLAN, Policy and Tag
-
Configuration›Tags & Profiles›WLANs›+ Add
- General > Profile Name / SSID: Guest
- Security > Layer2: None
- Security > Layer3: Web Policy ✓
- Web Auth Parameter Map: MS-WEBAUTH
- Authentication List: MS-Auth
- Show Advanced Settings > Preauthentication ACL: MS-PREAUTH
-
Configuration›Tags & Profiles›Policy›+ Add
- Name: MS-Policy
- Access Policies > VLAN: guest VLAN
- Advanced > AAA Policy > Accounting List: MS-Acct
-
Configuration›Tags & Profiles›Tags›Policy›+ Add
- WLAN Profile: Guest → Policy Profile: MS-Policy
- Assign the tag to the relevant APs
AireOS 8.x — shortcut
-
Security›AAA›RADIUS›Authentication›New
- Server IP: <HotSpot RADIUS IP>
- Shared Secret: <Shared secret>
- Port: 1812
-
Security›AAA›RADIUS›Accounting›New
- Server IP: <HotSpot RADIUS IP>
- Port: 1813
-
Security›Access Control Lists›Access Control Lists›New
- Name: MS-PREAUTH
- Permit DNS, DHCP and walled garden addresses
-
WLANs›Create New›Go›Security
- Layer 2: None
- Layer 3: Web Policy > Authentication
- Preauthentication ACL: MS-PREAUTH
- Over-ride Global Config: Enable
- Web Auth type: External
- URL: <HotSpot portal URL>
- AAA Servers: Authentication + Accounting = HotSpot
- Advanced > Interim Interval: 600
Syslog
-
Troubleshooting›Logs›Logging (9800) · Management›Logs›Config (AireOS)
- Syslog Server: <LogIQ collector IP>
- Logging level: Informational
Verification
- Policy Manager State should be RUN under Monitoring > Wireless > Clients.
- The session should appear in HotSpot and the RADIUS record in LogIQ.
Menu names may differ slightly between firmware versions. If you get stuck, our installation team supports you remotely.