Before you start
- SmartZone administrator account
- Zone and AP group where the guest WLAN will broadcast
- SmartZone reachability to HotSpot on UDP 1812/1813 and TCP 443
1. Authentication and accounting services
-
Services & Profiles›Authentication›Proxy (SZ Authenticator)›Create
- Name: HotSpot-Auth
- Service Protocol: RADIUS
- Primary Server IP: <HotSpot RADIUS IP>
- Port: 1812
- Shared Secret: <Shared secret>
-
Services & Profiles›Accounting›Proxy›Create
- Name: HotSpot-Acct
- IP Address: <HotSpot RADIUS IP>
- Port: 1813
- Shared Secret: <Shared secret>
2. Create the Hotspot (WISPr) portal
-
Services & Profiles›Hotspots & Portals›Hotspot (WISPr)›Create
- Name: HotSpot-Portal
- Logon URL: External
- Redirect unauthenticated user to: <HotSpot portal URL>
- Redirected MAC Format: AA:BB:CC:DD:EE:FF
- Start Page: Redirect to the URL that user intends to visit
- Session Timeout: 1440 min
- Grace Period: 60 min
-
Hotspot (WISPr)›HotSpot-Portal›Walled Garden
- Add each allowed domain from the HotSpot panel
3. Create the guest WLAN
-
Wireless LANs›(Zone)›Create
- Name / SSID: Guest
- Authentication Type: Hotspot (WISPr)
- Method: Open
- Hotspot (WISPr) Portal: HotSpot-Portal
- Authentication Service: HotSpot-Auth (Use the controller as proxy: on)
- Accounting Service: HotSpot-Acct
- Send Interim Update: 10 min
-
Wireless LANs›Guest›Advanced Options
- Client Isolation: Enable
- Bypass CNA: Disable
4. Forward syslog to LogIQ
-
System›General Settings›Syslog
- Enable Logging to Remote Syslog Server: On
- Primary Syslog Server: <LogIQ collector IP>
- Port: 514
- Event Filter: All Events
Verification
- The guest should show as “Authorized” under Monitor > Clients.
- A record with AP name and SSID should appear in HotSpot Live Sessions.
Menu names may differ slightly between firmware versions. If you get stuck, our installation team supports you remotely.