Before you start
- RouterOS 7.x, user with full rights
- Separate bridge or VLAN interface for guests
- Winbox access
1. Set up the hotspot server
-
IP›Hotspot›Servers›Hotspot Setup
- HotSpot Interface: guest bridge/VLAN
- Local Address of Network: e.g. 10.10.0.1/22
- Address Pool: suggested pool
- Select Certificate: none
- DNS Name: hotspot.local
- Skip the local user creation step
2. RADIUS client
-
RADIUS›+ (Add)
- Service: hotspot ✓
- Address: <HotSpot RADIUS IP>
- Secret: <Shared secret>
- Authentication Port: 1812 / Accounting Port: 1813
- Timeout: 3000 ms
-
RADIUS›Incoming
- Accept: ✓ · Port: 3799 (for session disconnect)
3. Server profile settings
-
IP›Hotspot›Server Profiles›hsprof1›Login
- Login By: HTTP PAP ✓ (untick the rest)
- HTTP Cookie Lifetime: 1d
-
IP›Hotspot›Server Profiles›hsprof1›RADIUS
- Use RADIUS: ✓
- Accounting: ✓
- Interim Update: 00:10:00
- MAC Format: XX:XX:XX:XX:XX:XX
4. External login page
-
Files›hotspot/login.html
Drag the login.html downloaded from the HotSpot panel over the existing file. It forwards the guest to <HotSpot portal URL> with the required parameters.
5. Walled garden
-
IP›Hotspot›Walled Garden›+ (Add)
- Action: allow
- Dst. Host: each domain from the HotSpot panel
-
IP›Hotspot›Walled Garden IP List›+ (Add)
- Action: accept
- Dst. Address: HotSpot portal IPs
6. Send logs to LogIQ
-
System›Logging›Actions›+ (Add)
- Name: logiq
- Type: remote
- Remote Address: <LogIQ collector IP>
- Remote Port: 514
-
System›Logging›Rules›+ (Add)
- Topics: hotspot → Action: logiq
- Topics: firewall → Action: logiq
- Topics: dhcp → Action: logiq
Verification
- The guest should appear in the IP > Hotspot > Active tab.
- The log should show “logged in” and RADIUS accounting messages.
Menu names may differ slightly between firmware versions. If you get stuck, our installation team supports you remotely.