Before you start
- Instant AP virtual controller or Aruba Central admin access
- Guest VLAN (or Virtual Controller assigned)
1. Authentication server
-
Configuration›Security›Authentication Servers›+ New
- Type: RADIUS
- Name: HotSpot
- IP address: <HotSpot RADIUS IP>
- Auth port: 1812 · Accounting port: 1813
- Shared key: <Shared secret>
- NAS IP address: Virtual Controller IP
2. External captive portal profile
-
Configuration›Security›External Captive Portal›+ New
- Name: HotSpot-ECP
- Type: Radius Authentication
- IP or hostname: HotSpot portal host
- URL: /portal path (shown in the panel)
- Port: 443 · Use https: Enabled
- Captive portal failure: Deny internet
- Redirect URL: empty (original address)
-
Configuration›Security›Walled Garden›Whitelist›+ New
- Add each domain from the HotSpot panel
3. Guest network
-
Configuration›Networks›+ (Add network)
- Name: Guest · Primary usage: Guest
- VLAN > Client IP assignment: Virtual Controller managed or Network assigned
- Security > Splash page type: External
- Captive portal profile: HotSpot-ECP
- Auth server 1: HotSpot
- Accounting: Use authentication servers · Interval: 10 min
- Access > Access rules: Role-based or Unrestricted
4. Syslog
-
Configuration›System›Monitoring›Syslog server
- Syslog server: <LogIQ collector IP>
- Syslog facility levels: Security, User, System = Informational
Verification
- The guest role should be “authenticated” in the Clients view.
- A record with the AP name should appear in HotSpot Live Sessions.
Menu names may differ slightly between firmware versions. If you get stuck, our installation team supports you remotely.